Mr.Steam

Description The Heating Element boils the tank water to build pressure and create steam. This 18KW element is used with the following models and qu...

Description The Heating Element boils the tank water to build pressure and create steam. This 18KW element is used with the following models and qu...

Description The Mr.Steam Element 39183F is designed for CU Steam Shower Generators. NOTE: To preserve the originality, operation and safety of repl...

Description The Mr.Steam Probe Spark Plug 90229 is designed for CU Steam Shower Generators. NOTE: To preserve the originality, operation and safety...

Description The Mr.Steam High Water No Rod Probe 90229-1 is designed for CU and CX Steam Shower Generators. NOTE: To preserve the originality, oper...

Description High Water Level Control NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.

Description Mr. Steam 90241MRT AUX Low Pressure water board. NOTE: To preserve the originality, operation and safety of replacement parts, this pro...

Description Mr.Steam Pilot Light AUX Low Water Cut Off CU Series NOTE: To preserve the originality, operation and safety of replacement parts, this...

Description The Mr.Steam On/Off Switch is required to manually power on and off the CU Commercial Steam Shower Generators. NOTE: To preserve the or...

Description The Mr.Steam 50‑amp 120V coil contactor is engineered for use with 480V/3PH CU Commercial Steam Shower Generators, featuring a three‑po...

Description The line and load side "L" is on top of the contactor. The line and load are spade terminal connections or wire lug connections. The 12...

Description The Mr.Steam Contactor is designed for reliable operation with both MS Residential and CT Day Spa Commercial Steam Shower Generators, p...

Description The Mr.Steam 1/2" 120V Water Feed Solenoid is a required component for proper water‑fill operation on CU‑Series Commercial Steam Shower...

Description The Mr.Steam 1/2" 240V Water Feed Solenoid is a required component for proper water‑fill operation on CU‑Series Commercial Steam Shower...

Description The Mr.Steam 1/4" 120V Water Feed Solenoid is a required component for proper water‑fill operation on CU‑Series Commercial Steam Shower...

Description Models CU360-CU1400 with serial numbers beginning with "AX" and models CU360 - CU750 with serial numbers beginning with "DP". The 1/4" ...

Description The Gauge Glass with 2 gaskets measuring 7-7/8” long allows for visual inspection the tanks water level. The orifices and glass will de...

Description The Mr.Steam 60‑amp 120V coil contactor is designed specifically for use with 208V/3PH CU Commercial Steam Shower Generators, featuring...

Description The Gauge Glass with 2 gaskets measuring 9-7/8” long allows for visual inspection the tanks water level. The orifices and glass will de...

Description The Gauge Glass with 2 gaskets measuring 11-3/4” long allows for visual inspection the tanks water level. The orifices and glass will d...

Description Mr.Steam Black Gasket 4-1/2" is designed for CU Series Steam Shower Generators. It is recommended to have some gaskets on-hand to be us...

Description The 4-1/2” diameter, 6-hole Gasket creates a seal between the heating element flange and generator tank. Compound is not required. NOTE...

Description Gasket, MX4E-6E, 5-3/4 NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.

Description The Operating Pressure Control has a set-point between 0-15 PSIG and is typically set at 5 PSIG to ensure the generator tank pressure d...