Products

Description The Gauge Glass with 2 gaskets measuring 7-7/8” long allows for visual inspection the tanks water level. The orifices and glass will de...

Description The Mr.Steam 60‑amp 120V coil contactor is designed specifically for use with 208V/3PH CU Commercial Steam Shower Generators, featuring...

Description The Gauge Glass with 2 gaskets measuring 9-7/8” long allows for visual inspection the tanks water level. The orifices and glass will de...

Description The Gauge Glass with 2 gaskets measuring 11-3/4” long allows for visual inspection the tanks water level. The orifices and glass will d...

Description Mr.Steam Black Gasket 4-1/2" is designed for CU Series Steam Shower Generators. It is recommended to have some gaskets on-hand to be us...

Description The 4-1/2” diameter, 6-hole Gasket creates a seal between the heating element flange and generator tank. Compound is not required. NOTE...

Description Gasket, MX4E-6E, 5-3/4 NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.

Description The Operating Pressure Control has a set-point between 0-15 PSIG and is typically set at 5 PSIG to ensure the generator tank pressure d...

Description The Mr.Steam Mechanical Low Water Cutoff and Feeder (MM 150) is an essential safety and fill‑management component for CU2000–CU4500 Com...

Description Mr.Steam Strainer 1/2" 200WBP NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returna...

Description The Mr.Steam 15 PSIG Safety Valve with 1/2" outlet provides essential over‑pressure protection for CU2000 Commercial Steam Shower Gener...

Description The Mr.Steam 15 PSIG Safety Valve with 1" outlet provides essential over‑pressure protection for CU4500 Commercial Steam Shower Generat...

Description Mr.Steam Check Valve Spring Type 1/2" CU Series  NOTE: To preserve the originality, operation and safety of replacement parts, this pro...

Description The Gauge Glass Valve Set is the 2 valves and protective rods. Glass is not included. The orifices and glass will develop lime over tim...

Description O-Ring, Gauge Glass, Viton NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.

Description The Mr.Steam 1/2" Valve Ball is female to female on each end and is steam rated (ASME) to be used on CU Commercial Steam Shower Generat...

Description Valve 1/2 F-F MS Series NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.

Description The Mr.Steam Steam Gate Valve 99182 is designed for CU Steam Shower Generators. NOTE: To preserve the originality, operation and safety...

Description The Mr.Steam 1" Steam Gate Valve is for use with CU Commercial Steam Shower Generators CU360 - CU4500. NOTE: To preserve the originalit...

Description Mr.Steam Terminal Block, 150AMP, 3-Pole, CU Series NOTE: To preserve the originality, operation and safety of replacement parts, this p...

Description The Low Pressure Steam 240V 1" solenoid initiates and terminates generator steam release into the steam room environment. This is a wea...

Description The Low Pressure Steam 240V 1/2” solenoid initiates and terminates generator steam release into the steam room environment. This is a w...

Description Mr.Steam 99286A Solenoid, Steam, 120V, 3/4'', for the CU Series. NOTE: To preserve the originality, operation and safety of replacement...

Description The Mr.Steam Pressure Gauge is required to visually monitor the operating pressure on CU Commercial Steam Shower Generators and has a r...